Multi-process, Automatic Tool Changing CNC Router designed for high-speed nesting and drilling.
CG Image: AT Series w/ Carousel-type ATC & Drill block.
Working with Cabinets
Working with Cabinets
Each axis of the CNC machinery has a linear system to move the vehicle to its desired location, includes Ball Screws or Rack and Pinion.
A rack and pinion is a type of linear actuator that comprises a circular gear (the pinion) engaging a linear gear (the rack), which operate to translate rotational motion into linear motion. Driving the pinion into rotation causes the rack to be driven linearly. Driving the rack linearly will cause the pinion to be driven into a rotation.
- Pros: 1. Cheaper to make. 2. Can be assembled together, thus more cost effective for long linear travels.
- Cons: 1. Top speed is lower. 2. Due to the gap between pinion tooth and rack tooth, it generally has lower re-positioning accuracy. 3. Higher power consumption and faster wear and tear due to its high inherent friction.
A ball screw is a mechanical linear actuator that translates rotational motion to linear motion with little friction. A threaded shaft provides a helical raceway for ball bearings which act as a precision screw. As well as being able to apply or withstand high thrust loads, they can do so with minimum internal friction. It's mostly seen on high-end products.
- Pros: 1. Higher top speed. 2. Close contact between ball bearing and the helical screw provides high re-positioning accuracy. 3. Little internal friction grants lower power consumption and much slower wear and tear if maintained properly.
- Cons: 1. More expensive to make. 2. Cost is prohibitive for long linear travels.
Servo motor is considered as closed-loop motor as it move on receipt of a command signal from their controller, with built-in encoders that continuously communicate back to the controller, which makes any needed adjustments to ensure the target position is reached.
Traditional stepper motors is considered as open-looped motor since it "steps" when they receive a command to advance a certain number of pulses, it does not aware the potential "missing steps" due to stall or skip. By adding an encoder and operating in closed-loop mode, stepper motor systems can achieve position monitoring and control much like servo motors.
Closed-loop stepper motors eliminate many of the disadvantages of traditional open-loop stepper systems, making them similar in performance to servo motors. But servo motors outperform even closed-loop steppers in applications that require high speed, high torque at high speed, or the ability to handle changing loads.
Improves your cabinets fabrication by centralizing processes, AT Series could effectively performs material loading, clamping, nesting, slotting, drilling, and unloading automatically. Rather than the expensive production line, now you can fabricate large quantity of cabinets in much smaller areas.
The complete machining of the CNC Router greatly shortens the production process chain and simplifies production management and scheduling. The more complex the workpiece, the more obvious its advantages over the traditional process-dispersed production methods.
Various multi-process setup approaches available, including multi-spindle, spindle w/ Auto Tool Changer (ATC), ATC spindle w/ drill block, and more.
M Series comes with industry proven motion controller options, integrated on the electrical cabin with handheld wheel.
Welded, stress relieved and machined all-steel base frame, gantry and gantry feet, Steel structures are reinforced with heavy ribs to resist flex and dampen vibrations.
Up to eight tools, automatic tool changer is available in various styles. This automatic tool changer allows tools up to 3.25 inches in diameter.
AR Series comes with either single or dual phenolic gridded tables. One of the dual tables acts as (un)loading deck while spindle works on the other one.
Power pump that creates high negative pressure, gives firm grid on materials you put on the machine table.
Programmatically load raw materials and unload finished products. This option comes with three parts, material storing rack, unloading belt, and gripping-pushing mechanism on the machinery.
Dual rubber roller located on both side of spindle, provides extra firm grip for small workpieces.
High power dust collection system removes dust while processing, keeps the workplace safe and clean.
Production line ready model, with Drill block, ATC, and material loading mechanism.
Multi-processing CNC Router comes with ATC.
Economical multi-processing approach with multiple spindles.
Automatic Tool Changing
CNC Boring Unit
Rapid Travel Speed
Vacuum Tool Hold Down
Extra Reinforced Structure
Automatic Loader / Unloader
: Custom travel options are available on request.
1. Furniture Manufacturing - Cabinets, Doors, Reliefs.
2. Panel Processing - Drilling, Nesting, Slotting of various ABS/PP/PE/GRP/PCB boards, Composite Panels, Wooden Panels.
AT Series is designed for rapid processing dozens of materials such as:
Acrylics, Carbon fibers, Plastics, Tooling boards, Fiberglass, Composite materials, Wooden materials, Solid woods, and many other non-metal materials.
We are constantly increasing the usability of our products, if you have used similar products before, most likely you will get AT Series up and running without much effort.
Moreover, CHENcan provides multiple support plans, including on-site training, remote training, and on-campus training. In addition, we have a huge library of pre-recorded tutorials and how-to videos for the common questions we have collected over the years.
Ask your dedicated CHENcan sales consultant for more details.
All AT Series controllers support G Code, which means, if the software at your choice exports to international standard G code, you could expect AT Series to load it.
In addition, we are very flexible on the choice of motion controllers, if you prefer specific brand model rather than our default options, we will try our best to adapt our machinery to fit your proposed controller.
Yes, you could book an appointment with your dedicated CHENcan sales consultant for a tour of our factory. One of our bilingual (English / Russian / Chinese) client champions will provide you guidance for the visit.
We may also provide airport pick up service according the availability of our limos.
[taken from email] ... Needless to say we are extremely satisfied with the machine. I would also like to say thank you to all your staff.
Primiipasi (Children Care)
Alu Composite Panels spol.sr.o
Dottore Muebles Furniture
TAC System Formwork
Join Our e-Mailing List:
Ask us anything! 👋😃 Feel free to talk to our client champions through any channel, and we are glad to help!
Your interaction will also help us understand how we can better provide the information you're looking for as efficiently as possible.