Extremely versatile CNC Routers that designed to process a multitude of materials such as composite materials, foam, plastic, wood, aluminum, and many more.
CG Image: M Series Basic Model Compact Layout
Each axis of the CNC machinery has a linear system to move the vehicle to its desired location, includes Ball Screws or Rack and Pinion.
A rack and pinion is a type of linear actuator that comprises a circular gear (the pinion) engaging a linear gear (the rack), which operate to translate rotational motion into linear motion. Driving the pinion into rotation causes the rack to be driven linearly. Driving the rack linearly will cause the pinion to be driven into a rotation.
- Pros: 1. Cheaper to make. 2. Can be assembled together, thus more cost effective for long linear travels.
- Cons: 1. Top speed is lower. 2. Due to the gap between pinion tooth and rack tooth, it generally has lower re-positioning accuracy. 3. Higher power consumption and faster wear and tear due to its high inherent friction.
A ball screw is a mechanical linear actuator that translates rotational motion to linear motion with little friction. A threaded shaft provides a helical raceway for ball bearings which act as a precision screw. As well as being able to apply or withstand high thrust loads, they can do so with minimum internal friction. It's mostly seen on high-end products.
- Pros: 1. Higher top speed. 2. Close contact between ball bearing and the helical screw provides high re-positioning accuracy. 3. Little internal friction grants lower power consumption and much slower wear and tear if maintained properly.
- Cons: 1. More expensive to make. 2. Cost is prohibitive for long linear travels.
Servo motor is considered as closed-loop motor as it move on receipt of a command signal from their controller, with built-in encoders that continuously communicate back to the controller, which makes any needed adjustments to ensure the target position is reached.
Traditional stepper motors is considered as open-looped motor since it "steps" when they receive a command to advance a certain number of pulses, it does not aware the potential "missing steps" due to stall or skip. By adding an encoder and operating in closed-loop mode, stepper motor systems can achieve position monitoring and control much like servo motors.
Closed-loop stepper motors eliminate many of the disadvantages of traditional open-loop stepper systems, making them similar in performance to servo motors. But servo motors outperform even closed-loop steppers in applications that require high speed, high torque at high speed, or the ability to handle changing loads.
Generally, an automatic tool changer or ATC is used to improve the capacity of the machine to work with several tools. It is also used to change worn out or broken tools. Without ATC, an operator is required to monitor and shut down the machinery to replace tools. An ATC can boost your production effectively in the following scenarios:
- The tool worn out quickly, or tools are being changed out frequently.
- The machining process requires multiple tools.
- The machining process takes a few days, tool change happens during off-hours.
Often in times, we need to rotate the workpiece in order to let spindle reach the desired place. Or we can using a 4-th axis to programmatically rotate the workpiece for us. For CNC Routers, there are two solutions:
1. Add the 4th axis to spindle, so it tilts sideways.
- Pros: Can work on curved surfaces with larger radius. Has more applications.
- Cons: Can only finishes half dome. More Expensive. Must be installed before leaving factory.
2. Add the 4th axis to workpiece, so it rotates along the axis.
- Pros: Can rotate the workpiece so all 360 degrees can be finished. Could be added as ad-hoc widget.
- Cons: Not an ideal option for heavy materials. Max radius is limited.
Improves your woodworking process by utilizing modern CNC technology. Save up to 75% of production time, gain better control over product quality, higher success rate, and reduce the total number of labors involved.
M Series CNC Machine Tools can nest, engrave, slot, mill, drill, and cut various materials including but not limited to Wood, PVC, Acrylic, Composite, Tooling Board, and Aluminum.
The complete machining of the CNC Router dramatically shortens the production process chain and simplifies production management and scheduling. The more complex the workpiece, the more obvious its advantages over the traditional process-dispersed production methods.
Compares to traditional approaches, our CNC technology effectively transforms digital drawings to actual products with high precision, thus raises the limits on the types of part geometries and dimensions you can provide. It unbridles the imaginations of you and your engineers to produce highly complex components.
Multiple variable speed, programmable spindle options available, air-cooled, 0 to 18,000 RPM. Liquid cooling spindle available for processing stones.
M Series comes with industry proven motion controller options, available as handheld console, or integrated on the electrical cabin.
Welded, stress relieved and machined all-steel base frame, gantry and gantry feet, Steel structures are reinforced with heavy ribs to resist flex and dampen vibrations.
With a bar style eight tool magazine ATC, you can quickly and easily change out router bits to achieve the cuts that you need.
Additional tilt (4th) Axis allows the spindle to shape the other two faces of the workpiece, increase your machining capabilities.
Additional slide-in 4-th Axis that lets the tool to reach where was blocked, increase your machining capabilities, while not affecting regular operations.
Various workpiece hold down options available (Manual, Vacuum), with T-Slots, T-Slot-Vacuum, Vacuum-Grid, or custom table and jigs.
High power dust collection system removes dust while processing, keeps the workplace safe and clean.
Periodically dispenses lubricating agent at preset volume and frequency. Features high-pressure pumps to ensure long-range delivery reduces wear and tear of drive systems.
A powerful pump creates high negative pressure that gives a firm grip on the materials you put on the machine table.
Provides automatic tool length measuring after changing tool bits.
With the water circulation system, M Series now could safely process stones.
The ultimate 4-Axis CNC Router with premium upgrades.
Versatile CNC Router for most of your machining needs.
Great option for first-time buyers.
Automatic Tool Changing
Rapid Travel Speed
Vacuum Tool Hold Down
Extra Reinforced Structure
Upgraded Control System
: Custom travel options are available on request.
1. Furniture Manufacturing - Cabinets, Rods, Reliefs, Furniture.
2. Woodworking - Interior Decorations, Hobbyist Projects.
2. Advertizing - Brand Plates, Acrylic Characters, Billboards, Signs.
3. Other - Stone processing, Aluminum processing.
M Series is designed for rapid processing dozens of materials such as:
Acrylics, Carbon fibers, Plastics, Tooling boards, Fiberglass, Composite materials, Wooden materials, Solid woods, Aluminum, and many other non-metal materials.
We are continually increasing the usability of our products. If you have used similar products before, most likely you will get M Series up and running without much effort.
Moreover, CHENcan provides multiple support plans, including on-site training, remote training, and on-campus training. In addition, we have a huge library of pre-recorded tutorials and how-to videos for the common questions we have collected over the years.
Ask your dedicated CHENcan sales consultant for more details.
All M Series controllers support G Code, which means, if the software at your choice exports to international standard G code, you could expect M Series to load it.
In addition, we are very flexible on the choice of motion controllers, if you prefer specific brand model rather than our default options, we will try our best to adapt our machinery to fit your proposed controller.
Yes, you could book an appointment with your dedicated CHENcan sales consultant for a tour of our factory. One of our bilingual (English / Russian / Chinese) client champions will provide you guidance for the visit.
We may also provide airport pick up service according the availability of our limos.
[taken from email] ...Needless to say, we are extremely satisfied with the machine. I would also like to say thank you to all your staff.
Primiipasi (Children Care)
Alu Composite Panels spol.sr.o
Dottore Muebles Furniture
TAC System Formwork
Join Our e-Mailing List:
Ask us anything! 👋😃 Feel free to talk to our client champions through any channel, and we are glad to help!
Your interaction will also help us understand how we can better provide the information you're looking for as efficiently as possible.